|
Air through a filter and a proportional valve and a suction regulator, the main control valve for regulating the pressure chamber of the air cylinder, rotor, vane formation. Rotation of the rotor relative to the cylinder showed a minimal amount of loss eccentric operation, the valve mounted on the rotor slot, and slide pushed by centrifugal force to the cylinder wall, and efficient fuel injection system to ensure that the cooling and lubricant compressor, the cylinder a thin film formed on the walls can prevent direct contact angle between the metal parts and cause wear. During compression, between vane compressor rotor and the cylinder volume declining, oil and gas mixture by mechanical separation and filtration separation compressed, the compressed air in the oil content of less than 3PPM. Condensate is discharged after purification of compressed air into the radiator for cooling, the cooling of the formed condensation water separator drain area via electronic means.
1. Air filter 5. rotor 9. cooler 13. The oil cooler inlet pipe 17 cooler 2. Automatic air inlet 6. The oil filter 10. The oil separator 14. The outlet pipe 18. The fan 3. Oil System 7. labyrinth return valve 11. The return valve 15. The intake pipe 19. The gas-water separator 4.The air pressure chamber 8. minimum pressure valve 12. The minimum pressure valve 16. The outlet pipe 20. The drain solenoid valve |
Copyright: Hefei Anhui Ma Tai compressor limited liability company ICP 11005042 -1 technical support:Altitude network
